V8 Portable Pipe Beveling Machines
EZLINK offer large range of pipe cutting and beveling machines. Pipe cutting beveling equipment for weld edge preparation of pipes is outstanding and very competitive.
V series is professional desiged ID mounted end prep equipment utilizes an expandable, self-centering mandrel system which mounts in the open end of a tube or pipe. Jaw blocks, corresponding to the size of pipe being worked on are placed on the mandrel. When a draw rod is tightened, jaw block bases are drawn up an inclined ramp, expanding the jaw blocks against the inside bore of the pipe. This provides a solid, torque-accepting grip for accurate machining operations.
V8 Clamping Range(ID): 65-210mm
Working Range(OD):8? (219.08mm)
V8 P Air Operated
V8 E Electric Operated, China Motor
|Power Supply||1200L/Min @0.6Mpa||220-240V 1PH 50/60HZ|
|Motor Power||1.5 HP||1200W|
|Working Range(OD)||65MM ID-219.08MM OD||65MM ID-219.08MM OD|
full set expanding blocks
3 pcs tool bits (1 Facing tool, 1x30deg. Beveling, 1×37.5deg Beveling)
Why choose V8 Pipe Beveling Machine
- Fast installation, the whole operation within 2 minutes.
- Screwing up pull-rod nut, it can make expanding block tighten the pipe, self-centering, efficiency and accuracy.
- The tight structure is changed more fast and convenient.
- New tight structure makes the machine more stable, with good rigidity and bevel quality.
- New tight structure with long life, easy to dismount, convenient to clean and maintain.
- Easy to install tool bits, it can be install and adjust within few seconds.
- Light-weight design is more suitable working for low clearance space.
- Three cutters can be arranged three tool bits for complex beveling operation at the same time.
- Aluminum body, light weight, convenient to carry it.
- Precision rolling bearing and sealed lubrication can extend using life to a maximum degree.
- It can process facing, V Type, Y type, U type, inside, seal groove and others complex beveling.
- Different driven, electric and air driven can used to all situation, especially electric driven with light weight, low noise and shake.
- Enough torque base on gear-driven with precision production, special steel and heat treatment.